Code Blu

• Autopilot Controler
• Icom VHF Command Mic
• MTU Controls

Tower

• Custom Palm Beach Towers Tuna Tower
• Molded Standing Platform
• Molded Buggy Top
• Steering and controls
• Control Box
• MTU Controls
• Hydraulic Rupp Outriggers with four spreader bars
• Center Rigger
• Radar pod
• Forward facing molded quartz light
• 2 Aft Facing quartz Lights
• Overhead drop down box
• Molded Teaser Real Box
• Miya Epoc US9 Teaser reels
• 8 rod holders on Fly bridge aft rail
• 4 rod holders on each tower leg

Construction

• Ablative/Copolymer anti-fouling bottom paint (2coats), using “Interlux Interprotected epoxy primer system”
• Awlgrip engine room, lazarette, forward bilge and anchor locker for enhanced visibility and easier maintenance
• blister resistant modified epoxy resin used in structural laminates, top-sides, bridges and hardtops
• Dupont cronar high-gloss polyurethane boot stripe
• Fiberglass holding tank with dockside and overboard pump out
• Fiberglass side thru-hulls
• High performance isophtalic gelcoat npg superior gloss, flexibility and outstanding weathering characteristics
• Hull interior – isophtalic gelcoat top-coated with a durable high gloss polyurethane coating
• Hull bottom – vacuum bagged end-grain balsa core sandwiched with fiberglass laminates
• Infused fiberglass baffles inside and balsa coring on sides for stiffness, sealed to hull with resin foam
• Laminated end-grain balsa core in hull sides and top-sides
• Molded fiberglass salon floor/engine room ceiling with foam core for acoustical and thermal insulation
• Prop pockets to reduce draft
• Solid reinforced keel 
• Stringers, fiberglass encapsulated foam 
• Tansducer location molded into keel
• Vacuum bagged composite bulkheads – Main engine room bulkhead, intermediate engine room bulkheads, and forward bulkhead

Mechanical

• Air conditioning – chilled water, 8 tons (two 4 ton units), zoned with reverse cycle heat for complete climate control throughout the interior and with individual temperature controls for staterooms and salon
• Bow thruster hydraulic-control buttons in single lever handles on open flybridge, or joy stick control on enclosed flybridge
• Bilge pumps with clean out pumps in keel area linked into monitoring system and connected to float switches for automatic and manual operation
• Centralized sea-water system
• “Delta T” engine room ventilation system with thermostatically controlled supply and discharge fans for proper fresh air circulation and water intrusion suppression
• “Delta T” pneumatically controlled engine room ventilation dampers, integrated into fire suppression system
• Dual stage variable speed 110V AC fresh water system with on deck fresh water fill and cockpit dockside supply inlet with pressure reducing valve
• Engine room entrance gauge package consisting of gauges for digital tachometer, engine water temperature, and engine oil pressure, and remote mounted engine start and stop switches for easier viewing and accessibility
• Fire suppression system, automatically and manually operated and tied into main engine and generator ignition systems with override
• Fresh water filter – paper
• Fresh water supply in engine room for general maintenance and cleaning 
• Fuel and oil lines, flexible, steel reinforced USCG approved, aircraft type 
• Power assist steering
• Fuel priming pumps for main engines, electric
• Fuel transfer and management system, 220 VAC pump with back up, 24 VDC pump controlled through Moritz control panels
• Head discharge holding tank or direct overboard
• Hour meters on main engines and generator
• Hydraulic bilge pump with manifold to forward, engine room and cockpit bilges
• Internal sea strainers for generator, and all other sea water pickups
• Main Engines: MTU 16V2000 M96 2635 MHP
• Mufflers – engine and generator in-line type with surge tubes in engine room
• Mufflers – generators, underwater gas/water seperators
• Oil changing system, gear type pump for main engines, transmissions, and generator with pump out line run to cockpit locker
• PEX plumbing, fresh water system with manifold system to isolate individual areas
• Propellers, class “S” pitch tolerance (ISO 484/2 and dynamic balancing), advance design cambered blade sections for optimum performance. Nibral alloy for maximum durability
• Racor dual fuel/water seperator filters for main engines and generator. Glass bowl type, top-loading for convenient replacing
• Rudders, stainless steel, composite rudder bearing with dirpless seal laminated into hull
• Seacocks, bronze, ball-type sea valves for all thru-hulls below the water line – Awlgrip snow white
• Shafts – 2 Aquamet high-strength stainless steel, double-taper with machined keyway and custom thrust plate at main engine couplings
• Structural steel engine beds mounted to transverse intermediate bulkheads to isolate torque and vibration/engine noise and ensure drive-train alignment
• Struts – thru-water, Nibral with composite bearings 
• Tides Marine water lubricated dirpless shaft seals with crossover water supply from both engines
• Trim tabs, with center, port and starboard tabs recessed in transom individual controls with fiberglass covers
• VIPER (Viking Independent Programmable Electro-hydraulic Rudder) steering system with electronic interface located under the helm for additional stations and future Autopilot
• Water heater – 30 gallons, dual element for quick recovery, electric

 Flying Bridge Open

• Battery system dedicated to flybridge electronics with battery charger
• Bridge installed without exposed fasteners
• Center console walk-around helm with electronic storage in raised pod with additional storage below 
• Connection lug for single side band grounding
• Custom helm pod with single lever electronic controls with emergency stops
• Custom stainless steel steering wheel for helm pod
• Depthfinder/sea temperature gauge – Furuno RD-30
• Electronic trolling valve controls with auto troll
• Extended overhang for extra room to move behind helm and companion seats with with anodized aluminum aft railing
• Fire system control with automatic and manual discharge and override system located at console
• Fresh water outlet forward locker
• Freezer, top loading, forward end of console for bait and food storage
• handrail, power-coated aluminum effectively positioned at helm console
• Instrumentation based on standard engine package, lighted with switches in radio box
• Lighted Ritchie compass, large and flush mounted on centerline
• Lounge seating to port and starboard and at forward end of helm console with vinyl covered foam cushions, hinged for access to storage under seats
• Manual engine shutdown switches at cabinet in console
• Moritz Octoplex touch screen control monitor with audible and visible alarms: fire, engine room temperature, high bilge water, high exhaust temperature, generator and tank monitors as well as confirming correct system operation
• Murray Products helm and companion seat, 3 seats, teak, ladder back with 4″ stainless pedestals and removable cushions and covers, adjustable
• Nonskid deck for traction and durability
• Port and starboard cabinet at aft end of lounge seating
• Recessed electronics box in console for custom electronics package that is easily viewable and protected from elements by acrylic fitted lid with gasket and stainless steel gas pistons
• Recessed radio boxes, large radio boxes on port and starboard side of console with switch panel inside
• Refridgerated top loading chill box at forward end of bridge for keeping drinks and snacks
• Sink with spray head at forward end of flybridge
• Stereo speakers, tied into stereo system in salon, and flush-mounted to aft ends of bridge with remote control
• Trim tab control switch mounted at console
• Trumpet style airhorns
• Under helms access with lights and storage room
• VHF radio with antenna and mounts – ICOM IC-M604
• VIPER (Viking Independant Programmable Electro-hydraulic Rudder) steering system with electronic interface located under the helm for additional stations and future Auto Pilot
• Windshield, centerline venturi cutout to maximize visibility

Galley/Dinette

• Custom pantry with wine cooler, excellent storage and custom rod storage
• Baby Ostrich Gelato headliner, 1/8″ foam and tricot backing
• Blinds
• Custom Amtico flooring
• Custom galley island, 360 degree access with refrigeration and freezers, custom granite, level 1 countertop and three bar stools with overhang for bar stool area
• Dinette couch with removable cushions and storage underneath
• Dinette table, mappa burl, high-gloss finish with oversized teak pedestal, thru-bolted
• Electric range, 4-burner cook top, surface-mounted
• Exhaust fan, high velocity
• Florescent lighting-backsplash
• Galley countertop, custom granite
• Garbage disposal in sink
• Lambrequins, fabric upholstered-inlaid in teak frames
• Miele electric oven
• Lighting, overhead LED lights recessed in headliner with dimmer switches
• Microwave/convection over located in upper galley cabinet
• Pantries forward of galley/dinette walk-in, maple lined
• Refrigerator and freezer, Sub-zero, large capacity, deep drawer under-counter style with varnished teak faces, (2) refrigerator units and (1) freezer unit
• Sink, stainless steel, under-mounted in countertop with satin nickel galley faucet
• Storage cabinets and drawers in lower galley, varnished teak doors and faces with stowage for utensils and other items
• Trash compactor in lower galley with teak face

Companionway

• Access to pantry forward of galley and dinette
• Awlgrip bilge areas with access hatches, snow white and lighted for easier maintenance and cleaning
• Carpeting, carpeted steps from galley through companionway
• Central vacuum unit connection with accessories
• Laundry center with stackable washer and dryer behind teak door
• Lighting, overhead LED lights recessed in headliner
• Staircase with banister along starboard companionway side
• Wall panels, natural style vinyl headliner individually installed with Velcro backing for easy maintenance 
• Amtico flooring

Electrical

• 24V DC ship’s service throughout
• Onan 27.5 KW generators
• 240/120V AC power supply
• 110V outlet in engine room of aft bulkhead
• Anchor light/navigation lights
• Batteries, (3) independent 24V banks mounted in fiberglass storage boxes, maintenance free
• Battery chargers, (3) with thermal cutoff and switching system for complete integration
• Battery distribution panel with battery cutoff and charging system breakers
• Battery parallel system for main engines and generator start
• Bonded electrical system with ground plate
• 2 100 AMP powercords
• Color-coded, labeled and numbered wiring system with corresponding drawings
• Engine room lights recessed AC and DC with switch at engine room entrance
• Generators, Diesel – (2) 32 KW Onan QD (electronic quiet diesel) Series, user-friendly with electronic governing allowing voltage and electronic frequency control (R)
• Glendinning cablemaster (2) with 3 wire grounded cord
• Individual switching for shore (1), shore (2) or generator supply located at main salon panel
• Instrument panel lights for flybridge and main electric panel
• Lighting, overhead LED lights recessed in ceiling and rope style decor lights concealed by teak valances, 24 VDC
• Magnetic switches for bilge lights 
• master electrical control provided via Moritz Octoplex Power Distribution System utlizing a redundant Can Bus control for AC/DC remote breaker electrical systems. Complete system control and monitoring provided by 2 integrated touch screen controls – (1) located at salon main entrance and (1) at flybridge helm
• Receptacles, 120V duplex with GFCI throughout
• SSB radio ground strap laminated deck house and hull
• Voltage stabilizer isolation transformers for more consistent, cleaner voltage – part of Charles combiner PM-3

Cockpit

• Boarding box, teak with nonskid, lift up top and storage
• Cable TV and telephone connections in cabinet under port forward gunwale and wired to a home run RG6 TV cable to accommodate satellite system and phone cable is two-pair to accommodate current data phone systems
• Cabinet with storage for gaffs and or other accessories under port and starboard gunwale
• Dockside electric connection – (2) 100 amp/220V electric retractable
• Dockside water connection with pressure reducing valve in cabinet under gunwale
• Drop-in In-deck storage boxes; (2) on starboard side for optional live well and storage box (1) fishbox port with pump out and drain plate with large holes for easy pump-out and cleaning
• Electric, sliding salon door – molded fiberglass with frameless window and teak interior
• Engine room access with door and ladder to engine room
• Extended flybridge overhang for shade
• Fresh water wash down with hose bib located in cabinet under gunwale
• Gaskets for all lids and access doors
• Glendinning Cablemasters in forward port and starboard cabinets under gunwales
• Grabrails at cockpit haunch
• Indirect rope lighting underneath the coaming
• Ladder to flybridges, one-piece, anodized aluminum with nonskid treads
• Laminated aluminum mounting plate in-deck for fighting chair and table
• Lazarette hatch with access to steering, trim tabs, drain pumps
• Lighting, recessed LED lights in flybridge overhang
• Observation mezzanine with starboard aft facing lounge seating with storage under lounge area, tackle cabinet with pull-out drawers and 2 large side by side bait freezers
• Recessed refrigerated chill box under-mounted in mezzanine step for direct access from cockpit
• Reinforced recessed, stainless steel cleats and hawse pipes
• Rod holders, (4) Rupp flush-mounted
• Rounded cockpit coaming for comfort
• Sea water wash down supply at cockpit dockside box to keep deck clean while fishing
• Self bailing cockpit with large scuppers
• Stainless steel gas springs on all hatches and lids
• Stereo speakers tied into salon stereo with remote control
• Straps with padding to secure engine room door and transom door and gate when open
• Transom swim steps at transom door
• Transom mounted fishbox with drain
• Valve to fill freshwater tank from dockside inlet
• Walk-through transom door with lift gate Y-valve fresh and salt water washdown
• Teak deck and mezzanine
• Transom fishbox plumbed as baitwell
• Transom door with gate
• IZY & 244 electric reel outlets
• Release Marine Trillion series fishing chair w/ stainless offset pedestal
• Cockpit cover
• Cockpit awning with poles

Salon

• Air conditioning with reverse cycle heat that circulates from concealed registers behind the valances to maximize comfort while minimizing noise and drafts – individual temperature control
• Blinds for desired natural lighting and additional privacy
• Carpeting, wall-to-wall with lead lined padding for sound absorption
• Cocktail table, mappa burl, high-gloss finish-hi/low
• Custom Amtico flooring salon entrance 
• Decorative throw pillows for sofa
• Fixed, frameless side windows with tinted, tempered glass for style, natural lighting, and privacy
• Home theater center with 55″ TV on a raise and lower mechanism with antenna or cable hook-up, and Bose Lifestyle 48 system with custom surround sound. With optional Flying Bridge enclosed, TV is fixed mounted
• Ice maker, clear ice type concealed in teak cabinetry behind door
• Indirect decorative rope lighting behind valances, 24 VDC
• Lambrequins, fabric upholstered-inlaid in teak frames
• Lighting, overhead LED lights recessed in headliner with dimmer switches
• L-shaped lounge with rod storage underneath
• Main electrical panel with AC selector breakers and Moritz Octoplex touch screen monitor
• Sliding electric salon door, molded fiberglass door with window and teak interior finish, with key lock
• Teak cabinetry with drawers and bottle storage
• Upholstery and window treatments
• Valances custom team, fluted
• Custom rod storage under sofa

Master Stateroom (Full Beam)

• Airconditioning with temperature control
• Bedspead – quilted, designer style
• Amtico flooring
• Closets, port and starboard, twin maple-lined hanging closets with teak doors
• Decorative indirect rope lighting from underneath bed platform and behind valances
• Drawer storage under bed, (2) large drawers
• End tables at port and starboard ends of bed with drawer and door storage
• Entertainment center, FM/DVD surround systems with subwoofer
• Fixed port & starboard port lights
• Headboard, upholstered
• King-size walk-around fore and aft bed
• Lighting overhead LED lights recessed in headliner with dimmer switch
• Pillow shams (2)
• Port and starboard side credenza with drawer storage 
• Reading lights, overhead with seperate switches
• Seating starboard side, built-in
• Samsung TV 40″ flat screen
• Vanity/desk area with stool

VIP Stateroom

• Air conditioning/heat with temperature control
• Bedspread – quilted, designer style
• Carpeting
• Central vacuum unit connection with accessories
• Decorative indirect rope lighting from underneath bed platform and behind valances
• Hanging locker, teak, maple-lined and spacious with bar for hanging clothes
• head access in both staterooms
• Lighting, overhead LED lights recessed in headliner with dimmer switches
• Pillow shams (2)
• Queen-size walkaround bed with System #1 upgraded mattress, “Handcraft” innerspring and lift up top with gas pistons and cedar-lined storage underneath
• Reading lights with seperate switches
• Sheets, (1 set)
• Stereo speakers recessed tied into salon stereo with remote control
• Storage cabinets, port and starboard sides of bed, teak
• Storage drawers underbed, (2) large drawers
• TV, Samsung 19″ flat screen

Guest Stateroom

• Air conditioning/heat with temperature control
• Bedspread – quilted, designer style
• Amtico flooring
• Decorative indirect rope lighting from underneath bed platform and behind valances
• Hanging locker, maple-lined with bar for hanging clothes
• Head access in both staterooms
• Lighting, overhead LED lights
• Pillow shams (2)
• Stereo speakers recessed tied into salon stereo with remote control
• Storage drawers located under hanging locker
• Upper and lower bunks with System #1 upgraded mattress, “Handcraft” innerspring and lift up bottom for storage in both staterooms
• Samsung TV

Master, Guest & Crew Heads

• Air conditioning/heat with register in soffit
• Custom Amtico flooring
• Head countertop, granite level 1
• Exhaust fan with vent in soffit
• Linen storage
• Lower vanity with curved teak face
• Lighting, overhead LED lights recessed in soffit and in ceiling
• Medicine cabinet with mirrored doors
• Mirror around upper vanity insert
• One-piece custom frameless shower door in master head
• Receptacle, 120V – GFCI
• Shower light
• Sink – biscuit with satin nickel finish
• Stall shower, fiberglass with satin nickel finish
• Stall shower, fiberglass with satin nickel fixtures
• Storage cabinet with shelves and mirrored door in master head
• Towel bar and ring – satin nickel

Day Head

• Aft salon port side just inside salon cockpit entrance
• Air conditioning/heat with register in soffit
• Custom Amtico flooring
• Head countertop, custom granite, level 1
• Exhaust fan with vent in soffit
• Lower vanity with curved teak face
• Lighting, overhead LED lights in recessed in soffit and ceiling

Miscellaneous

• Lewmar hydraulic windlass
• Plowstyle anchor with SS removable anchorchute
• Fortress anchor in anchor locker
• Fire extinguishers (8)
• Fresh water wash down at bow in anchor locker
• Fuel
• Mooring lines, 3 strand nylon (6)
• Recessed covers on transom to protect trim tab pistons
• Ships bell
• Shore cord, 100 amp to 50 amp smart Y
• Side-mounted grabrails, power-coated aluminum that follows the window line
• Stainless steel bow, spring and stern cleats thru-bolted to aluminum backing plates
• Fender racks

Exclusion

• Owner’s personal items and fishing gear/tackle